Examinando por Autor "Caro, Nelson"
Mostrando 1 - 7 de 7
Resultados por página
Opciones de ordenación
Ítem A Modeled High-Density Fed-Batch Culture Improves Biomass Growth and β-Glucans Accumulation in Microchloropsis salina(MDPI, 2022-12) Ocaranza, Darío; Balic, Iván; Bruna, Tamara; Moreno, Ignacio; Díaz, Oscar; Moreno, Adrián A.; Caro, NelsonAlgae and microalgae are used as a source of different biomolecules, such as lipids and carbohydrates. Among carbohydrates, polysaccharides, such as β-glucans, are important for their application as antioxidants, antisepsis, and immunomodulators. In the present work, the β-glucans production potential of Microchloropsis salina was assessed using two different culture conditions: a high-density batch and a modeled high-density fed-batch. From the biochemical parameters determined from these two cultures conditions, it was possible to establish that the modeled high-density fed-batch culture improves the biomass growth. It was possible to obtain a biomass productivity equal to 8.00 × 10−2 ± 2.00 × 10−3 g/(L × day), while the batch condition reached 5.13 × 10−2 ± 4.00 × 10−4 g/(L × day). The same phenomenon was observed when analyzing the β-glucans accumulation, reaching volumetric productivity equal to 5.96 × 10−3 ± 2.00 × 10−4 g of product/(L × day) against the 4.10 × 10−3 ± 2.00 × 10−4 g of product/(L × day) obtained in batch conditions. These data establish a baseline condition to optimize and significantly increase β-glucan productivity, as well as biomass, adding a new and productive source of this polymer, and integrating its use in potential applications in the human and animal nutraceutical industry. © 2022 by the authors.Ítem A Modeled High-Density Fed-Batch Culture Improves Biomass Growth and β-Glucans Accumulation in Microchloropsis salina(Plants, 2022-12) Ocaranza, Darío; Balic, Iván; Bruna, Tamara; Moreno, Ignacio; Díaz, Oscar; Moreno, Adrián A.; Caro, NelsonAlgae and microalgae are used as a source of different biomolecules, such as lipids and carbohydrates. Among carbohydrates, polysaccharides, such as β-glucans, are important for their application as antioxidants, antisepsis, and immunomodulators. In the present work, the β-glucans production potential of Microchloropsis salina was assessed using two different culture conditions: a high-density batch and a modeled high-density fed-batch. From the biochemical parameters determined from these two cultures conditions, it was possible to establish that the modeled high density fed-batch culture improves the biomass growth. It was possible to obtain a biomass pro ductivity equal to 8.00 × 10−2 ± 2.00 × 10−3 g/(L × day), while the batch condition reached 5.13 × 10−2 ± 4.00 × 10−4 g/(L × day). The same phenomenon was observed when analyzing the β-glucans accumulation, reaching volumetric productivity equal to 5.96 × 10−3 ± 2.00 × 10−4 g of product/(L × day) against the 4.10 × 10−3 ± 2.00 × 10−4 g of product/(L × day) obtained in batch conditions. These data establish a baseline condition to optimize and significantly increase β-glucan productivity, as well as biomass, adding a new and productive source of this polymer, and integrating its use in potential applications in the human and animal nutraceutical industry.Ítem Florfenicol Binding to Molecularly Imprinted Polymer Nanoparticles in Model and Real Samples(MDPI AG, 2020-02) Caro, Nelson; Bruna, Tamara; Guerreiro, Antonio; Alvarez-Tejos, Paola; Garretón, Virginia; Piletsky, Sergey; González-Casanova, Jorge; Rojas-Gómez, Diana; Ehrenfeld, NicoleA simple and straightforward technique for coating microplate wells with molecularly imprinted polymer nanoparticles (nanoMIPs) to develop assays similar to the enzyme-linked immunosorbent (ELISA) assay to determine and quantify florfenicol (FF) in real food samples such as liquid milk and salmon muscle is presented here. The nanoMIPs were synthesized by a solid-phase approach with an immobilized FF (template) and characterized using dynamic light scattering, a SPR-2 biosensor system and transmission electron microscopy. Immobilization of nanoMIPs was conducted by preparing a homogenous solution of FF-nanoMIPs in water mixed with polyvinyl alcohol (PVA) 0.2% (w/v) in each well of a microplate. The detection of florfenicol was achieved in competitive binding experiments with a horseradish peroxidase−florfenicol (FF-HRP) conjugate. The assay made it possible to measure FF in buffer and in real samples (liquid milk and salmon muscle) within the range of 60−80 and 90–100 ng/mL, respectively. The immobilized nanoMIPs were stored for six weeks at room temperature and at 5 °C. The results indicate good signal recovery for all FF concentrations in spiked milk samples, without any detrimental effects to their binding properties. The high affinity of nanoMIPs and the lack of a requirement for cold chain logistics make them an attractive alternative to traditional antibodies used in ELISA. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.Ítem Improving Lurasidone Hydrochloride’s Solubility and Stability by Higher-Order Complex Formation with Hydroxypropyl-β-cyclodextrin(MDPI, 2024-03-03) Gamboa-Arancibia, María Elena; Caro, Nelson; Gamboa, Alexander; Morales, Javier Octavio; González Casanova, Jorge Enrique; Rojas Gómez, Diana Marcela; Miranda-Rojas, SebastiánThe biopharmaceutical classification system groups low-solubility drugs into two groups: II and IV, with high and low permeability, respectively. Most of the new drugs developed for common pathologies present solubility issues. This is the case of lurasidone hydrochloride—a drug used for the treatment of schizophrenia and bipolar depression. Likewise, the stability problems of some drugs limit the possibility of preparing them in liquid pharmaceutical forms where hydrolysis and oxidation reactions can be favored. Lurasidone hydrochloride presents the isoindole-1,3-dione ring, which is highly susceptible to alkaline hydrolysis, and the benzisothiazole ring, which is susceptible to a lesser extent to oxidation. Herein, we propose to study the increase in the solubility and stability of lurasidone hydrochloride by the formation of higher-order inclusion complexes with hydroxypropyl-β-cyclodextrin. Several stoichiometric relationships were studied at between 0.5 and 3 hydroxypropyl-β-cyclodextrin molecules per drug molecule. The obtained products were characterized, and their solubility and stability were assessed. According to the obtained results, the formation of inclusion complexes dramatically increased the solubility of the drug, and this increased with the increase in the inclusion ratio. This was associated with the loss of crystalline state of the drug, which was in an amorphous state according to infrared spectroscopy, calorimetry, and X-ray analysis. This was also correlated with the stabilization of lurasidone by the cyclodextrin inhibiting its recrystallization. Phase solubility,1H-NMR, and docking computational characterization suggested that the main stoichiometric ratio was 1:1; however, we cannot rule out a 1:2 ratio, where a second cyclodextrin molecule could bind through the isoindole-1,3-dione ring, improving its stability as well. Finally, we can conclude that the formation of higher-order inclusion complexes of lurasidone with hydroxypropyl-β-cyclodextrin is a successful strategy to increase the solubility and stability of the drug.Ítem Improving Lurasidone Hydrochloride’s Solubility and Stability by Higher-Order Complex Formation with Hydroxypropyl-β-cyclodextrin(MDPI, 2023-01) Gamboa-Arancibia, María Elena; Caro, Nelson; Gamboa, Alexander; Morales, Javier Octavio; González Casanova, Jorge Enrique; Rojas Gómez, Diana Marcela; Miranda-Rojas, SebastiánThe biopharmaceutical classification system groups low-solubility drugs into two groups: II and IV, with high and low permeability, respectively. Most of the new drugs developed for common pathologies present solubility issues. This is the case of lurasidone hydrochloride—a drug used for the treatment of schizophrenia and bipolar depression. Likewise, the stability problems of some drugs limit the possibility of preparing them in liquid pharmaceutical forms where hydrolysis and oxidation reactions can be favored. Lurasidone hydrochloride presents the isoindole-1,3-dione ring, which is highly susceptible to alkaline hydrolysis, and the benzisothiazole ring, which is susceptible to a lesser extent to oxidation. Herein, we propose to study the increase in the solubility and stability of lurasidone hydrochloride by the formation of higher-order inclusion complexes with hydroxypropyl-β-cyclodextrin. Several stoichiometric relationships were studied at between 0.5 and 3 hydroxypropyl-β-cyclodextrin molecules per drug molecule. The obtained products were characterized, and their solubility and stability were assessed. According to the obtained results, the formation of inclusion complexes dramatically increased the solubility of the drug, and this increased with the increase in the inclusion ratio. This was associated with the loss of crystalline state of the drug, which was in an amorphous state according to infrared spectroscopy, calorimetry, and X-ray analysis. This was also correlated with the stabilization of lurasidone by the cyclodextrin inhibiting its recrystallization. Phase solubility,1H-NMR, and docking computational characterization suggested that the main stoichiometric ratio was 1:1; however, we cannot rule out a 1:2 ratio, where a second cyclodextrin molecule could bind through the isoindole-1,3-dione ring, improving its stability as well. Finally, we can conclude that the formation of higher-order inclusion complexes of lurasidone with hydroxypropyl-β-cyclodextrin is a successful strategy to increase the solubility and stability of the drug. © 2023 by the authors.Ítem Nanomaterials for Potential Detection and Remediation: A Review of Their Analytical and Environmental Applications(Coatings, 2024-12) Salazar Sandoval, Sebastián; Bruna, Tamara; Maldonado-Bravo, Francisca; Jara, Paul; Caro, Nelson; Rojas-Romo, Carlos; González-Casanova, Jorge; Gómez, Diana Rojas; Yutronic, Nicolás; Urzúa, Marcela; Rodríguez-San Pedro, AnniaThe rapid increase in industrialization and human population is leading to critical levels of environmental pollutants, such as agrochemicals or heavy metals, which affect the preservation and integrity of ecosystems, the accessibility to drinking water sources, and the quality of the air. As such, remediation of these issues demands strategies for implementing and designing novel technologies. In that regard, nanomaterials have unique physicochemical properties that make them desirable candidates for the detection and remediation of environmental pollutants. The scope of this review is to provide an analysis of the available nanomaterials that are being used as an approach to detect and remediate hazardous residues, comprising systems such as noble metals, biosensors, cyclodextrin-based polymers, and graphene oxide nanocomposites, to name a few. Furthermore, this work discusses said nanomaterials in terms of their effectiveness, sustainability, and selectivity as a guideline for researchers wishing to indulge in this relevant study area.Ítem Nanomaterials for Potential Detection and Remediation: A Review of Their Analytical and Environmental Applications(MDPI, 2024) Salazar Sandoval, Sebastián; Bruna, Tamara; Maldonado-Bravo, Francisca; Jara, Paul; Caro, Nelson; Rojas-Romo, Carlos; González-Casanova, Jorge; Gómez, Diana Rojas; Yutronic, Nicolás; Urzúa, Marcela; Rodríguez-San Pedro, AnniaThe rapid increase in industrialization and human population is leading to critical levels of environmental pollutants, such as agrochemicals or heavy metals, which affect the preservation and integrity of ecosystems, the accessibility to drinking water sources, and the quality of the air. As such, remediation of these issues demands strategies for implementing and designing novel technologies. In that regard, nanomaterials have unique physicochemical properties that make them desirable candidates for the detection and remediation of environmental pollutants. The scope of this review is to provide an analysis of the available nanomaterials that are being used as an approach to detect and remediate hazardous residues, comprising systems such as noble metals, biosensors, cyclodextrin-based polymers, and graphene oxide nanocomposites, to name a few. Furthermore, this work discusses said nanomaterials in terms of their effectiveness, sustainability, and selectivity as a guideline for researchers wishing to indulge in this relevant study area.