Hardware-in-the-loop to test an mppt technique of solar photovoltaic system: A support vector machine approach

Vista sencilla de ítem
dc.contributor.authorGonzález-Castaño, C.
dc.contributor.authorMarulanda, J.
dc.contributor.authorRestrepo, C.
dc.contributor.authorKouro, S.
dc.contributor.authorAlzate, A.
dc.contributor.authorRodriguez, J.
dc.date.accessioned2021-05-25T22:22:03Z
dc.date.available2021-05-25T22:22:03Z
dc.date.issued2021-03
dc.descriptionIndexación Scopuses
dc.description.abstractThis paper proposes a new method for maximum power point tracking (MPPT) of the photovoltaic (PV) system while using a DC-DC boost converter. The conventional perturb and observe (P&O) method has a fast tracking response, but it presents oscillation around the maximum power point (MPP) in steady state. Therefore, to satisfy transient and steady-state responses, this paper presents a MPPT method using support vector machines (SVMs). The use of SVM will help to improve the tracking speed of maximum power point of the PV system without oscillations near MPP. A boost converter is used to implement the MPPT method, where the input voltage of the DC-DC converter is regulated using a double loop where the inner loop is a current control that is based on passivity. The MPPT structure is validated by hardware in the loop, a real time and high-speed simulator (PLECS RT Box 1), and a digital signal controller (DSC) are used to model the PV system and implement the control strategies, respectively. The proposed strategy presents low complexity and it is implemented in a commercial low-cost DSC (TI 28069M). The performance of the MPPT proposed is presented under challenging experimental profiles with solar irradiance and temperature variations across the panel. In addition, the performance of the proposed method is compared with the P&O method, which is traditionally most often used in MPPT under demanding tests, in order to demonstrate the superiority of the strategy presented. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.es
dc.description.urihttps://www.mdpi.com/2071-1050/13/6/3000
dc.identifier.citationSustainability (Switzerland), Volume 13, Issue 6, 2 March 2021, Article number 3000es
dc.identifier.doi10.3390/su13063000
dc.identifier.issn20711050
dc.identifier.urihttp://repositorio.unab.cl/xmlui/handle/ria/18945
dc.language.isoenes
dc.publisherMDPI AGes
dc.subjectMaximum Power Point Trackerses
dc.subjectPowerpointes
dc.subjectPhotovoltaic Systemes
dc.subjectCurrent control based on passivityes
dc.subjectHardware in the loop testinges
dc.subjectPhotovoltaic systemes
dc.subjectSupport vector machineses
dc.titleHardware-in-the-loop to test an mppt technique of solar photovoltaic system: A support vector machine approaches
dc.typeArtículoes
Archivos
Bloque original
Mostrando 1 - 1 de 1
Miniatura
Nombre:
Gonzalez_C_Hardware_in_the_loop_2021.pdf
Tamaño:
15.16 MB
Formato:
Adobe Portable Document Format
Descripción:
TEXTO COMPLETO EN INGLÉS
Descargar
Bloque de licencias
Mostrando 1 - 1 de 1
No hay miniatura disponible
Nombre:
license.txt
Tamaño:
1.71 KB
Formato:
Item-specific license agreed upon to submission
Descripción:
Descargar
Colecciones
FIng - Artículos de Revista