Dual-Boost Inverter for PV Microinverter Application—An Assessment of Control Strategies

Photovoltaic (PV) microinverters have grown rapidly in the small-scale PV market, where typical two-stage converters are used to connect one PV module to the single-phase AC grid. This configuration achieves better performance in terms of energy yield compared with other PV configu-rations. However, the conversion efficiency of a two-stage system is the main drawback, especially when a high-voltage gain effort is required. In this context, single-stage microinverter topologies have been recently proposed since only one power conversion stage is required to extract the maximum power of the PV module and inject the AC power to the grid. This single-stage configuration allows considerable improvement of the overall efficiency of microinverters by reducing the number of elements in the system. However, the main challenge of these topologies is their control, since all variables of the converter are composed by the AC waveform with DC-bias. In this paper, four control strategies are analyzed for the mainstream single-stage topology, which is the dual-boost inverter (DBI). Classical linear control and three non-linear strategies, namely finite control set–model predictive control, flatness-based control, and sliding mode control, are detailed. The main contribution of this work is a complete comparison of the control strategies, to give insights into the most suitable control strategy for the DBI in PV microinverter application.

Notas

Indexación: Scopus.

Palabras clave

FCS–model predictive control, Flatness-based control, Photovoltaic energy, PV microinverter, Single-stage topologies, Sliding mode control

Citación

Applied Sciences (Switzerland) Open Access Volume 12, Issue 12June-2 2022 Article number 5952

DOI

10.3390/app12125952

URI

https://repositorio.unab.cl/xmlui/handle/ria/53261

Colecciones

FIng - Artículos de Revista

Página completa del ítem